ECE Room Assignments: Apr 2020 Electronics Engineering Board Exam (with Requirements, Exam Tips, More!)

If you will be taking the April 2020 Electronics and Communications Engineering (ECE) Board Exam, please find below your PRC Room Assignments and designated testing centers for the following locations:

  • Manila NCR
  • Baguio
  • Cagayan de Oro (CDO)
  • Cebu
  • Davao
  • Legazpi
  • Lucena
  • Tacloban

These exam venues were released by the organization authorized to administer all licensure exams in the Philippines, the Professional Regulation Commission or PRC.

You can find them by scrolling towards the bottom of this page. But please note: If you find that the ECE Room Assignments are not yet viewable, make sure to view this page daily and to bookmark it so you’ll be the first to know once updates to this page, especially with regards to your designated testing center, have been published!

Aside from your board exam room assignments, you will also find on this page the requirements to be able to take your exam, its syllabus or coverage, and best of all, exam tips so you can pass!

Thus, don’t forget to read all of the information and tips we’ve prepared for you here. Each piece of information here will surely help you pass the Apr 2020 ECE Board Exam so you can soon become a licensed Electronics Engineer!

ECE Room Assignments- Board Exam

Get Updates about Your ECE Room Assignments

We publish updates as soon as they are released by the PRC! To be updated about the April 2020 ECE board exam room assignments, exam results, and other announcements, make sure to:

Date and Time of the ECE Board Exam

The Apr 2020 Electronics and Communications Engineering Board Exam will be held on April 1-2, 2020.

It will start at 7 A.M. on the first day and end at 6 P.M. on the second day.

Despite this start time, please note that you are required to be in your designated PRC room assignment at an earlier time. You can see this and all the licensure exam requirements below.

Electronics Engineering Board Exam Requirements

Important Reminders

1. Do not be late. Late examinees will NOT be admitted. On the first day of your Board Exam, examinees should be at the testing venue by 6:30 a.m.

2. Make sure to read and follow all the instructions in your Examinee’s Kit and Notice of Admission (NOA).

What You are Allowed to Bring

You must remember to bring these items with you on the day/s of your licensure exam:

  • Notice of Admission (NOA)
  • Official Receipt
  • Two (2) or more Pencils (No. 2)
  • One (1) metered-stamped window mailing envelope
  • One (1) long, transparent plastic envelope (for safekeeping of valuables)
  • One (1) Long-size brown envelope
  • Calculator with the following features only: addition, subtraction, multiplication, division, trigonometric function, logarithm, and x^y

What You are NOT Allowed to Bring

Make sure that you do NOT bring the following items as they are prohibited in the exam premises:

  • Bags of any kind (shoulder bag, handbag, backpack, etc.)
  • Ballpens of any kind
  • Programmable calculators
  • Cellphones, smart watches, portable computers, and other electronic gadgets which can be used for communication
  • Books, notes, review materials or any printed materials containing formula, information, helpful tools, etc.
  • Other examination aides not stated here

Bringing any of these items can serve as grounds for exam disqualification!

Dress Code for your Board Exam

Please keep in mind that there is a required Dress Code that you must follow on the day/s of your exam.

The Dress Code is as follows:

  • For Males – White polo shirt with collar (without any seal, logo, or mark), tucked in. Decent pants or slacks.
  • For Females –White blouse or shirt with collar (without any seal, logo, or mark). Decent pants, slacks, or skirt.

Educational Requirements

Skills and Competencies

A graduate of the Bachelor of Science in Electronics and Communications Engineering (ECE) program must have attained the following skills and competencies:

Electronics Engineering Practice

  • To abide by engineering practice and with highest integrity
  • To conceptualize, analyze, and design electronics engineering projects
  • To generate technical specifications
  • To conduct engineering evaluation, experiment, and investigation

Research and Development

  • To apply basic methods of research and development
  • To engage in independent and collaborative research and development programs

Management of Significant Projects

  • To interpret scope of projects
  • To explain and practice quality, safety, and risk management
  • To participate in the discussion of plans, programs, strategies, and budget
  • To integrate systems
  • To integrate changes in and modify existing systems

Operation Management

  • To apply time motion study
  • To perform measurement and system analysis

As these are the skills and competencies of that are expected of Electronics Engineers, make sure you possess these because in one way or another, they will mostly likely show up in your licensure exam!

Source: Professional Regulation Commission (PRC)

ECE Board Exam Coverage

Speaking of topics that will show up in your board exam, you must keep in mind that your exam will cover all of the following topics and subjects:

  • Mathematics
  • Electronics Engineering
  • General Engineering and Applied Sciences
  • Electronics Systems and Technologies

As the exam is divided into sections made up of each major subject above, don’t forget to set aside time to study all these — and each and every subtopic within these subjects!

Tips and Best Practices: How to Pass the ECE Board Exam

Now that you know what you must study for your licensure exam, you must be asking yourself these questions:

What is the best and most effective way to study all these exam topics?

How can I increase my chances of passing the board exam?

No need to worry because on this section, we will share with you the top tips and best practices on how you can pass your board exam!

We have divided them into two (2) sections, namely:

  • Before the exam (how to effectively study); and
  • On the day of the exam

Most of these came from actual board exam passers who have experienced what you are (and will be) going through as your exam date draws near. So make sure you read and implement them so you can increase your chances of passing the exam!

Study Tips for the ECE Board Exam

1. First and foremost: Study smarter not harder.

Study Tips for the Board Exam

What does this mean exactly? And more importantly, how can you truly “study smarter” and not harder?

Here are additional information about this useful tip: 6 Study Tips So You’ll Pass the Board Exam. In this article, six (6) ways were identified in order for an examinee to be able to study harder, namely:

  • Spaced Practice (Do NOT cram)
  • Interleaving (Switch between topics)
  • Elaboration (Understand how topics connect with each other)
  • Concrete Examples (Use examples for better understanding)
  • Dual Coding (Use verbal and visual learning materials)
  • Retrieval Practice (Try to remember what you just studied)

If you implement these study tips as you prepare for the Electronics Engineering Board Exam, you will surely fare better and get a higher score!

So, if you want to understand these study techniques better — and to be able to watch a video explaining them! — make sure to click: 6 Study Tips So You’ll Pass the Board Exam

2. Our second source comes from Knowledge Plus, where they share not just study tips but also MISTAKES that examinees commit when trying to study!

In their article, they highlight 10 mistakes that you should avoid as well as 10 techniques to be able to correct those mistakes and study better.

Some of these mistakes involve:

  • Assuming that learning is fast
  • Believing that multitasking is easy, especially during class or studying
  • Relying too much on your instructors to prepare you

Some of the study tips, on the other hand, are:

  • Discover your learning style
  • Start a study group
  • Get enough sleep

If you are interested to learn what these mistakes and study techniques are, click: How to Study for Boards: Avoid these 10 Common Mistakes PLUS 10 Tips and Strategies

Preparation Tips Before and During the Exam

Ironically enough, our best tip to enable you to be in the best condition on the day of your exam is one that should be implemented days before your exam.

That tip is: Make sure that you actually visit your exam venue and PRC room assignment DAYS BEFORE your exam date.

This is so you can be 100% sure where and how to go to your designated exam venue.

Doing this enables you to:

  • Avoid being late (or lost!) on the day of your exam
  • Estimate the number of hours or minutes it will take to get to your testing center
  • See how bad traffic is on the way to your exam venue
  • Experience multiple routes so you can see which one is best to take
  • Attain peace of mind, knowing that you already know the best and fastest way to reach your PRC room assignment on the day of your exam

Given how horrible and unpredictable traffic is these days, you must do this, especially since you are required to be at your exam venue by 6:30 AM.

Remember, being late can serve as grounds for exam disqualification. So don’t let all your hard work studying go to waste. Make sure to visit your room assignment beforehand!

ECE Room Assignment: Apr 2020 Electronics Engineering Board Exam

Now that you are aware of all the requirements, guidelines, and tips to pass, please find below your April 2020 ECE Room Assignment.

When viewing the PDF file of your exam venue below, please make sure that it has been downloaded completely. If the PDF file fails to load, just refresh this page.

If you don’t see a PDF file below your exam venue, it means that the PRC is still finalizing its testing centers. Make sure to check back here daily so you can be the first to see once it has been updated!

MANILA Room Assignment: ECE Board Exam

BAGUIO Room Assignment: ECE Board Exam

CAGAYAN DE ORO (CDO) Room Assignment: ECE Board Exam

CEBU Room Assignment: ECE Board Exam

DAVAO Room Assignment: ECE Board Exam

LEGAZPI Room Assignment: ECE Board Exam

LUCENA Room Assignment: ECE Board Exam

TACLOBAN Room Assignment: ECE Board Exam

Get Updates about Your ECE Room Assignment

If you find that the April 2020 Electronics Engineering Board Exam Room Assignments are not yet available, don’t fret; it simply means that the PRC is not yet ready to publish them. So just check back here daily to see if they have finalized it already.

More importantly, we publish updates as soon as they are released by the PRC! To be updated about the ECE board exam room assignments, exam results, and other announcements, make sure to: